NORYL™ NH4030B resin

About
NH4030B is a modified PPE-HIPS blend that presents an excellent balance of non halogenated flame retardance, lower smoke production upon burning and low specific gravity for light weight parts. NORYL NH4030B is available in custom colors and may be an excellent material candidate for applications requiring light weight parts and may be processed by injection molding or extrusion techniques.&&

Product Description
SupplierSABIC
GenericPPO(PPE)+PS
Material StatusCommercial: Active
FeaturesLow smoke,Halogen free,Flame Characteristics,Low density
AvailabilitysNorth America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.11g/cm³ASTM D792
Density1.11g/cm³ISO 1183
Melt Flow Rate ASTM D1238
280℃,5.0kg18g/10minASTM D1238
300℃,5.0kg43g/10minASTM D1238
Melt Volume Rate ISO 1133
280℃,5 kg17.6cm³/10minISO 1133
300℃,5 kg41.0cm³/10minISO 1133
Shrinkage rate
MD:3.2 mm0.50 to 0.80%Internal Method
Water absorption rate
Saturation, 23 ℃0.27%ISO 62
Equilibrium, 23 ℃, 50% RH0.045%ISO 62

MECHANICALNominal valueUnitTest method
Tensile modulus2450MPaASTM D638
Tensile modulus2430MPaISO 527-1-2
tensile strength
fracture46.8MPaASTM D638
fracture47.8MPaISO 527-2/50
yield56.2MPaASTM D638
yield54.0MPaISO 527-2/50
Tensile strain 
fracture28%ASTM D638
yield4.0%ISO 527-2/50
yield4.3%ASTM D638
fracture28%ISO 527-2
fracture28%ISO 527-2/50
Bending modulus2390MPaISO 178
50 mm span2400MPaASTM D790
bending strength90.0MPaISO 178
bending strength
Yield, 50 mm span90.0MPaASTM D790

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength
23℃19kJ/m²ISO 179/1eA
Impact strength of cantilever beam notch ASTM D256
-30℃120J/mASTM D256
23℃200J/mASTM D256
Impact strength of cantilever beam notch ISO 180/1A
-30℃11kJ/m²ISO 180-1A
23℃16kJ/m²ISO 180-1A
Dart impact equipped with measuring instruments
23℃,Total Energy46.0JASTM D3763

THERMALNominal valueUnitTest method
Hot deformation temperature ASTM D648
1.8 MPa, unannealed, 64 mm span107ISO 75-2/Af
1.8 MPa, unannealed, 3.2 mm106ASTM D648
1.8 MPa, unannealed, 6.4 mm113ASTM D648
Vicat Softening Temp127ASTM D1525 10
Vicat Softening Temp 
B50127ISO 306
B120129ISO 306/B120
Linear coefficient of thermal expansion
TD:-40~40℃8.5E-51/℃ASTM E831
TD:-40~40℃8.5E-51/℃ISO 11359-2
MD:-40~40℃8.4E-51/℃ASTM E831
MD:-40~40℃8.4E-51/℃ISO 11359-2

FLAME CHARACTERISTICSNominal valueUnitTest method
Draeger Tube Toxicity 
Flaming:1.52 mmPass 
Non-Flaming:1.52 mmPass 
Flame Spread Index(1.52 mm)15.0 ASTM E162
NBS smoke density ASTM E662
Flaming,20 min:3.20 mm126 ASTM E662
Flaming,4 min:1.52 mm29.0 ASTM E662
Flaming,4 min:3.20 mm35.0 ASTM E662
Non-Flaming,4 min:1.52 mm7.00 ASTM E662
Vertical combustion test FAR 25.853
Test a(60 s,1.52 mm),passes at0.0hrFAR 25.853
Test b(12 s,1.52 mm),passes at4.00secFAR 25.853

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.20 in/min
3. Type I, 2.0 in/min
4. 0.051 in/min
5. 0.079 in/min
6. at Yield
7. 80*10*4 sp=62mm
8. 80*10*4 mm
9. Rate A (50°C/h), Loading 2 (50 N)
10. 4 min
11. 20 min
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.
Inquire Nowlink