| About |
|---|
| NORYL NH6010B resin is a high performance, modified PPE-PS blend that exhibits an excellent balance of lower smoke production upon burning, nonhalogenated flame retardance and low specific gravity. This grade can be processed via extrusion or injection molding. NORYL NH6010B is available in custom colors and may be an excellent material candidate for use in building and construction and electrical markets.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PPO(PPE)+PS |
| Material Status | Commercial: Active |
| Features | Low smoke,Halogen free,Flame Characteristics,Low density,V-0 |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.11 | g/cm³ | ASTM D792 |
| Density | 1.12 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 280℃，5.0kg | 5.7 | g/10min | ASTM D1238 |
| Melt Volume Rate | |||
| 280℃，5 kg | 5.70 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.50 to 0.80 | % | Internal Method |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.20 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 0.050 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2220 | MPa | ASTM D638 |
| Tensile modulus | 2440 | MPa | ISO 527-1-2 |
| tensile strength | |||
| fracture | 53.0 | MPa | ASTM D638 |
| fracture | 58.0 | MPa | ISO 527-2/50 |
| yield | 64.0 | MPa | ASTM D638 |
| yield | 64.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| fracture | 20 | % | ASTM D638 |
| fracture | 8.3 | % | ISO 527-2/50 |
| yield | 4.7 | % | ISO 527-2/50 |
| yield | 4.6 | % | ASTM D638 |
| Bending modulus | 2360 | MPa | ISO 178 |
| 50 mm span | 2390 | MPa | ASTM D790 |
| bending strength | 100 | MPa | ISO 178 |
| bending strength | |||
| Yield, 50 mm span | 100 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 20 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃ | 180 | J/m | ASTM D256 |
| 23℃ | 300 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | ISO 180/1A | ||
| -30℃ | 15 | kJ/m² | ISO 180-1A |
| 23℃ | 19 | kJ/m² | ISO 180-1A |
| Dart impact equipped with measuring instruments | |||
| 23℃，Total Energy | 52.0 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 64 mm span | 124 | ℃ | ISO 75-2/Af |
| 1.8 MPa, unannealed, 3.2 mm | 122 | ℃ | ASTM D648 |
| Vicat Softening Temp | 143 | ℃ | ASTM D1525 10 |
| Vicat Softening Temp | |||
| B50 | 143 | ℃ | ISO 306 |
| B120 | 146 | ℃ | ISO 306/B120 |
| Linear coefficient of thermal expansion | |||
| TD：-40~40℃ | 6.7E-5 | 1/℃ | ISO 11359-2 |
| TD：-40~40℃ | 6.7E-5 | 1/℃ | ASTM E831 |
| MD：-40~40℃ | 6.7E-5 | 1/℃ | ASTM E831 |
| MD：-40~40℃ | 6.7E-5 | 1/℃ | ISO 11359-2 |
| Relative temperature index | |||
| Electrical performance | 65.0 | ℃ | UL 746 |
| Strength mechanical performance | 65.0 | ℃ | UL 746 |
| Impact mechanical performance | 65.0 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.3E+18 | ohms | ASTM D257 |
| Surface resistivity | 1.3E+18 | ohms | IEC 60093 |
| Volume resistivity | 7.6E+17 | ohms·cm | ASTM D257 |
| Volume resistivity | 7.6E+17 | ohms·cm | IEC 60093 |
| Dielectric strength | |||
| 3.2 mm in oil | 34 | kV/mm | IEC 60243-1 |
| 3.2 mm in oil | 34 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 MHz | 2.78 | ASTM D150 | |
| Relative permittivity | |||
| 1 MHz | 2.78 | IEC 60250 | |
| Dissipation factor | |||
| 1 MHz | 2.9E-3 | IEC 60250 | |
| 1 MHz | 2.9E-3 | ASTM D150 | |
| Compared to the leakage tracing index | 225 | V | IEC 60112 |
| High Arc Burning Index (HAI) | PLC 1 | UL 746 | |
| Hot wire ignition | |||
| HWI | PLC 2 | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V-0 | UL 94 | |
| Glowing wire flammability index | |||
| 1.6 mm | 960 | ℃ | IEC 60695-2-12 |
| Igniting temperature of the hot wire | IEC 60695-2-13 | ||
| 1 mm | 775 | ℃ | IEC 60695-2-13 |
| 2 mm | 775 | ℃ | IEC 60695-2-13 |
| 3 mm | 800 | ℃ | IEC 60695-2-13 |
| Extreme oxygen index | 34 | % | ISO 4589-2 |
| Ds_4min | 70 | ISO 5659-2 | |
| F1 Class Smoke and Toxicity Rating | 3.00 | mm | NF F16-101 |
| Flame Spread Index（1.52 mm） | 15.0 | ASTM E162 | |
| Heat dissipation | |||
| MAHRE | 33.6 | kW/m² | ISO 5660-1 |
| Lateral Flame Spread（CFE） | 20.0 | kW/m² | ISO 5658-2 |
| M1 Flame Class Rating | 2.00 | mm | NF P 92501 |
| NBS smoke density | ASTM E662 | ||
| Flaming，20 min：3.20 mm | 120 | ASTM E662 | |
| Flaming，4 min：1.52 mm | 30.0 | ASTM E662 | |
| Flaming，4 min：3.20 mm | 30.0 | ASTM E662 | |
| Non-Flaming，4 min：1.52 mm | 7.00 | ASTM E662 | |
| toxicity | |||
| — | 0.0200 | ISO 5659-2 | |
| 3.00 mm | 21.8 | NF X70-100 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. Type I, 2.0 in/min |
| 4. 0.051 in/min |
| 5. 0.079 in/min |
| 6. at Yield |
| 7. 80*10*4 sp=62mm |
| 8. 80*10*4 mm |
| 9. Rate A (50°C/h), Loading 2 (50 N) |
| 10. Surface |
| 11. 4 min |
| 12. 20 min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |