NORYL™ SA120 resin

About
NORYL™ SA120 resin NORYL SA120 resin is a low molecular weight polymer based on Polyphenylene ether (PPE). NORYL SA120 is intended for use as additive or building block in a variety of thermoplastics, thermoplastic elastomers like Styrenic Block Copolymers, and thermoset materials like Epoxies, Phenolics, Polyurethanes, and Unsaturated Polyesters. Properties that may be improved by adding NORYL SA120 resin to these thermosets can include: Thermal (glass transition temperature), Adhesion (at elevated temperatures), Mechanical (toughness, dimensional stability), Chemical resistance (acids, bases), Moisture absorption, and Electrical Properties (dielectric constant, dissipation factor).&&

About

NORYL™ SA120 resin NORYL SA120 resin is a low molecular weight polymer based on Polyphenylene ether (PPE). NORYL SA120 is intended for use as additive or building block in a variety of thermoplastics, thermoplastic elastomers like Styrenic Block Copolymers, and thermoset materials like Epoxies, Phenolics, Polyurethanes, and Unsaturated Polyesters. Properties that may be improved by adding NORYL SA120 resin to these thermosets can include: Thermal (glass transition temperature), Adhesion (at elevated temperatures), Mechanical (toughness, dimensional stability), Chemical resistance (acids, bases), Moisture absorption, and Electrical Properties (dielectric constant, dissipation factor).&&

Product Description
Supplier	SABIC
Generic	PPO(PPE)
Material Status	Commercial: Active
Features	Low molecular weight
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.02	g/cm³	ISO 1183
1% weight loss (TGA)	290	℃	Internal Method
D	2.70		Internal Method
Decomposition temperature – Onset (TGA)	440	℃	Internal Method
Gardner Color – 20% in Toluene			Internal Method
—	14.0		Internal Method
—	12.0		Internal Method
Intrinsic viscosity	0.12	dl/g	Internal Method
Mn	2350		Internal Method
Mw	6300		Internal Method
Phenolic End（group Content）	425	µmol/g	Internal Method
Tg（half width）	165	℃	Internal Method
Viscosity（Pure，240℃）	73.4	Pa·s	Internal Method

THERMAL	Nominal value	Unit	Test method
Softening temperature
R&B	210	℃	ASTM D36-95

Electrical performance	Nominal value	Test method
Dielectric constant
1 MHz	2.54	ASTM D150
Dissipation factor
1 MHz	7.0E-4	ASTM D150

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.