NORYL™ SA90 resin

About
NORYL™ SA90 resin NORYL SA90 resin is a modified low molecular weight resin with increased hydroxyl functionality. It is designed specifically for use as a reactive component in epoxy and cyanate ester thermosets in electronic, coatings, adhesives, and composites applications. It has outstanding solubility in toluene & methyl ethyl ketone (MEK) and a low solution viscosity. Targeted application areas are in enhancing the performance (e.g. thermal, dielectric, mechanical, flame retardancy, and moisture uptake properties) of epoxy resins used in electronic packaging which include PCB laminates, copper clad laminates, epoxy prepregs, and protective coatings as well as various other composites applications.&&

About

NORYL™ SA90 resin NORYL SA90 resin is a modified low molecular weight resin with increased hydroxyl functionality. It is designed specifically for use as a reactive component in epoxy and cyanate ester thermosets in electronic, coatings, adhesives, and composites applications. It has outstanding solubility in toluene & methyl ethyl ketone (MEK) and a low solution viscosity. Targeted application areas are in enhancing the performance (e.g. thermal, dielectric, mechanical, flame retardancy, and moisture uptake properties) of epoxy resins used in electronic packaging which include PCB laminates, copper clad laminates, epoxy prepregs, and protective coatings as well as various other composites applications.&&

Product Description
Supplier	SABIC
Generic	PPO(PPE)
Material Status	Commercial: Active
Features	Low Viscosity,Low molecular weight
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.02	g/cm³	ASTM D792
hydroxyl equivalent
HEW	840	g/mol	Internal Method
Intrinsic viscosity	0.090	dl/g	Internal Method
Mn	1600		Internal Method
Phenolic End（group Content）	2	%	Internal Method
solubility			Internal Method
Methyl Ethyl Ketone：21℃	50.0	wt%	Internal Method
Toluene：21℃	50.0	wt%	Internal Method
Tg（half width）	140	℃	Internal Method
viscosity			Internal Method
50wt% methyl ethyl ketone, 25 ℃	0.16	Pa·s	粘度
50wt% toluene, 25 ℃	0.298	Pa·s	粘度

Electrical performance	Nominal value	Test method
Dielectric constant
1 MHz	2.54	ASTM D150
Dissipation factor
1 MHz	7.0E-4	ASTM D150

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.