NORYL™ SA9000 resin

About
NORYL™ SA9000 resin NORYL SA9000 resin is a modified low molecular weight resin with vinyl end-groups. It is well suited for use with other unsaturated monomers and resins which cure via free radical reactions. These include styrenic, allylic, acrylic, maleimide, methacrylic, and unsaturated polyesters monomers and resins. It has a low solution viscosity and outstanding solubility in toluene & methyl ethyl ketone (MEK). Key application areas are in electronic packaging which include PCB laminates, copper clad laminates, non-epoxy prepregs, and adhesives. The use of NORYL SA9000 is especially advantageous in insulating materials where very low dielectric properties and decreased moisture absorption are required.&&

About

NORYL™ SA9000 resin NORYL SA9000 resin is a modified low molecular weight resin with vinyl end-groups. It is well suited for use with other unsaturated monomers and resins which cure via free radical reactions. These include styrenic, allylic, acrylic, maleimide, methacrylic, and unsaturated polyesters monomers and resins. It has a low solution viscosity and outstanding solubility in toluene & methyl ethyl ketone (MEK). Key application areas are in electronic packaging which include PCB laminates, copper clad laminates, non-epoxy prepregs, and adhesives. The use of NORYL SA9000 is especially advantageous in insulating materials where very low dielectric properties and decreased moisture absorption are required.&&

Product Description
Supplier	SABIC
Generic	PPO(PPE)
Material Status	Commercial: Active
Features	Low or no water absorption,Low Viscosity,Low molecular weight
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.02	g/cm³	ASTM D792
Mn	2300		Internal Method
Phenolic End（group Content）	300	ppm	Internal Method
Tg（half width）	160	℃	Internal Method
Vinyl Functionality	1.90		Internal Method
Intrinsic viscosity	0.090	dl/g	Internal Method
solubility			Internal Method
Methyl Ethyl Ketone：21℃	50.0	wt%
Toluene：21℃	50.0	wt%
viscosity			Internal Method
50wt% methyl ethyl ketone, 25 ℃	0.16	Pa·s
50wt% toluene, 25 ℃	0.298	Pa·s

Electrical performance	Nominal value	Test method
Dielectric constant
1 MHz	2.54	ASTM D150
Dissipation factor
1 MHz	7.0E-4	ASTM D150

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.