| About |
|---|
| PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. UL94 V1, UL746C F1. Dielectric strength. Suitable for E/E market indoor/outdoor applications.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PPO(PPE)+PS |
| Material Status | Commercial: Active |
| Features | Halogen free,V-0,V-1,Flame Characteristics |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.09 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 280℃，5.0kg | 8.5 | g/10min | ASTM D1238 |
| Melt Volume Rate | |||
| 280℃，5 kg | 8.70 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| TD | 0.50 to 0.70 | % | Internal Method |
| MD：3.2 mm | 0.50 to 0.70 | % | Internal Method |
| Water absorption rate | |||
| 24hr | 0.060 | % | ASTM D570 |
| Weathering resistance | f1 | UL 746C | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2500 | MPa | ASTM D638 |
| Tensile modulus | 2670 | MPa | ISO 527-1-2 |
| tensile strength | |||
| fracture | 53.1 | MPa | ASTM D638 |
| fracture | 50.8 | MPa | ISO 527-2/50 |
| yield | 65.0 | MPa | ASTM D638 |
| yield | 61.3 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| fracture | 21 | % | ISO 527-2/50 |
| fracture | 15 | % | ASTM D638 |
| yield | 4.3 | % | ISO 527-2/50 |
| yield | 4.0 | % | ASTM D638 |
| Bending modulus | ASTM D790 | ||
| 50 mm span | 2700 | MPa | ASTM D790 |
| 100 mm span | 2400 | MPa | ASTM D790 |
| Bending modulus | 2560 | MPa | ISO 178 |
| bending strength | 99.5 | MPa | ISO 178 |
| bending strength | ASTM D790 | ||
| Yield, 50 mm span | 100 | MPa | ASTM D790 |
| Yield, 100 mm span | 98.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| 23℃ | 15 | kJ/m² | ISO 180-1A |
| 23℃ | 2600 | J/m | ASTM D4812 |
| -30℃ | 110 | J/m | ASTM D256 |
| 23℃ | 180 | J/m | ASTM D256 |
| Dart impact equipped with measuring instruments | |||
| 23℃，Total Energy | 49.7 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.2 mm | 127 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 6.4 mm | 129 | ℃ | ASTM D648 |
| Hot deformation temperature | ASTM D648 | ||
| 1.8 MPa, unannealed, 100 mm span | 115 | ℃ | ISO 75-2/Ae |
| 0.45 MPa, unannealed, 100 mm span | 129 | ℃ | ISO 75-2/Be |
| 1.8 MPa, unannealed, 3.2 mm | 113 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 6.4 mm | 118 | ℃ | ASTM D648 |
| Vicat Softening Temp | |||
| B50 | 132 | ℃ | ISO 306 |
| B120 | 135 | ℃ | ISO 306/B120 |
| Linear coefficient of thermal expansion | |||
| TD：-40~40℃ | 8.8E-5 | 1/℃ | ASTM E831 |
| MD：-40~40℃ | 8.0E-5 | 1/℃ | ASTM E831 |
| Relative temperature index | |||
| Electrical performance | 110 | ℃ | UL 746 |
| Strength mechanical performance | 110 | ℃ | UL 746 |
| Impact mechanical performance | 105 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+15 | ohms | ASTM D257 |
| Volume resistivity | 2.3E+16 | ohms·cm | ASTM D257 |
| Dielectric strength | |||
| 3.2 mm in oil | 18 | kV/mm | ASTM D149 |
| Dielectric constant | ASTM D150 | ||
| 50 Hz | 2.52 | ASTM D150 | |
| 60 Hz | 2.52 | ASTM D150 | |
| 1 MHz | 2.46 | ASTM D150 | |
| Dissipation factor | ASTM D150 | ||
| 50 Hz | 3.4E-3 | ASTM D150 | |
| 60 Hz | 3.4E-3 | ASTM D150 | |
| 1 MHz | 2.1E-3 | ASTM D150 | |
| Arc resistance | PLC 6 | ASTM D495 | |
| Compared to the leakage tracing index | PLC 1 | UL 746 | |
| High voltage arc marking rate | |||
| HVTR | PLC 4 | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.50 mm | V-1 | UL 94 | |
| 6.00 mm | V-0 | UL 94 | |
| Radiation Plate Listing (UL) | RP100 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 104 to 110 | °C | |
| Drying time | 3.0 to 4.0 | hr | |
| Drying time, maximum | 8.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Suggested injection volume | 30 to 70 | % | |
| Temperature at the rear of the barrel | 249 to 299 | °C | |
| Temperature in the middle of the barrel | 260 to 304 | °C | |
| Front temperature of material barrel | 271 to 310 | °C | |
| Nozzle temperature | 282 to 310 | °C | |
| Processing (melt) temperature | 282 to 310 | °C | |
| Mold temperature | 77 to 104 | °C | |
| Back pressure | 0.345 to 0.689 | MPa | |
| Screw speed | 20 to 100 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tensile Bar |
| 3. 2.0 in/min |
| 4. Type I, 2.0 in/min |
| 5. 0.10 in/min |
| 6. 0.051 in/min |
| 7. 0.079 in/min |
| 8. at Yield |
| 9. 80*10*4 mm |
| 10. 120*10*4 mm |
| 11. Tungsten Electrode |
| 12. UL Tested |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |