| About |
|---|
| Norylux modified PPO is a strong engineering plastic with outstanding mechanical, thermal, and electrical properties. Low moisture absorption and low thermal expansion make Norylux one of the most dimensionally stable thermoplastics available. Norylux is widely used for electrical housings and structural components since it has excellent insulating properties, flame resistance, and dimensional stability over a wide range of service temperatures. Norylux is often selected for fluid handling applications since it has low moisture absorption and excellent strength and stiffness. Norylux is easy to fabricate, paint, and glue. Applications Include: Manifolds Pump, valve, and fitting applications Scientific and analytical instrument components Housings Covers Electrical components Advantages of Norylux: Excellent dimensional stability Low moisture absorption Good strength and stiffness over a wide range of service temperatures Good impact resistance High dielectric strength Easy to fabricate, paint, and glue Excellent flammability rating (UL94 V-1 @ .058″ thick)&& |
| Product Description | |
|---|---|
| Supplier | Westlake Plastics |
| Generic | PPO(PPE)+PS |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Thermal insulation,High impact resistance,Good Dimensional Stability,Good Electrical Properties,Sprayable,Flame Characteristics,Low moisture absorption,V-1,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.070 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -40℃ | 130 | J/m | ASTM D256 |
| 23℃ | 190 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 123 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 5.9E-5 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 20 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 60 Hz | 2.69 | ASTM D150 | |
| Dissipation factor | |||
| 60 Hz | 7.0E-4 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.50 mm | V-1 | UL 94 | |
| 6.00 mm | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 119 | ASTM D785 | |
| tensile strength | |||
| yield | 63.4 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 25 | % | ASTM D638 |
| Bending modulus | 2550 | MPa | ASTM D790 |
| bending strength | |||
| yield | 99.3 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |