| About |
|---|
| NOTIO™ is a flexible, low density, transparent elastomer with excellent heat resistance. The resin is not cross- linked and demonstrates superior elasticity. NOTIO’s crystalline and amorphous structure (morphology) is controlled at the nano scale, allowing for the realization of properties that cannot be achieved with conventional elastomers.&& |
| Product Description | |
|---|---|
| Supplier | Mitsui |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Good flexibility,High elastic,Crystal,High Heat Resistance,Low density,Amorphous |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.866 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 6.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 70 | ASTM D2240 | |
| Tensile modulus | 12.0 | MPa | Internal Method |
| tensile strength | |||
| fracture | 12.0 | MPa | Internal Method |
| Tensile strain | |||
| fracture | > 800 | % | Internal Method |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Set（150% Strain） | 12 | % | Internal Method |
| Compression deformation | Internal Method | ||
| 23℃，24 hr | 20 | % | Internal Method |
| 70℃，24 hr | 60 | % | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -28.0 | ℃ | ASTM D746 |
| Glass transition temperature | 135 | ℃ | Internal Method |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 2000 µ m, molded | 6.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. JIS K7113-2 |
| 3. JIS K7113-2, 0.3 mm |
| 4. JIS K7113-2, 12 mm, 25% compression |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |