Novalloy-A A2706

About
Novalloy-A A2706 (Dry) Novalloy-A A2706 is an Acrylonitrile Butadiene Styrene + PA (ABS+Nylon) product filled with 30% glass fiber. It is available in Europe. Characteristics include: Flame Rated Heat Resistant High Strength Impact Resistant&&Novalloy-A A2706 Novalloy-A A2706 is an Acrylonitrile Butadiene Styrene + PA (ABS+Nylon) material. It is available in Asia Pacific. Primary attribute of Novalloy-A A2706: Flame Rated.&&

About

Novalloy-A A2706 (Dry) Novalloy-A A2706 is an Acrylonitrile Butadiene Styrene + PA (ABS+Nylon) product filled with 30% glass fiber. It is available in Europe. Characteristics include: Flame Rated Heat Resistant High Strength Impact Resistant&&Novalloy-A A2706 Novalloy-A A2706 is an Acrylonitrile Butadiene Styrene + PA (ABS+Nylon) material. It is available in Asia Pacific. Primary attribute of Novalloy-A A2706: Flame Rated.&&

Product Description
Supplier	Daicel
Generic	ABS+PA
Material Status	Commercial: Active
Features	High impact resistance,High Heat Resistance,Good Tensile Strength
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.31	g/cm³	ASTM D792
Shrinkage rate
MD	0.10 to 0.50	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
—	—	J/m	ASTM D256
23℃，3.2mm	140	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	200	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	117		ASTM D785
tensile strength
fracture	124	MPa	ASTM D638
Tensile strain
fracture	4.0	%	ASTM D638
Bending modulus	6890	MPa	ASTM D790
bending strength	207	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.