Novalloy-B B27B3 (Type M)

About
Novalloy-B B27B3 (Type M) is an Acrylonitrile Butadiene Styrene + PBT (ABS+PBT) material filled with 15% glass fiber. It is available in Asia Pacific. Primary attribute of Novalloy-B B27B3 (Type M): Flame Rated.&&

Product Description
Supplier	Daicel
Generic	ABS+PBT
Material Status	Commercial: Active
Features	HB
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.33	g/cm³	ISO 1183
Shrinkage rate
MD	0.40 to 0.60	%	ASTM D955
Water absorption rate
23℃，24hr	0.15	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	80.0	MPa	ISO 527-2
Bending modulus	5000	MPa	ISO 178
bending strength	115	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	6.0	kJ/m²	ISO 179/1eA
Impact strength of cantilever beam notch
23℃，6.4mm	60	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, 6.4 mm	200	℃	ASTM D648
0.45 MPa, unannealed	200	℃	ISO 75-2/B
1.8 MPa, unannealed, 6.4 mm	180	℃	ASTM D648
1.8 MPa, unannealed	155	℃	ISO 75-2/A
Linear coefficient of thermal expansion			ISO 11359-2
MD	3.0E-5	1/℃	ISO 11359-2
TD	1.0E-4	1/℃	ISO 11359-2

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80 to 120	°C
Drying time	3.0 to 5.0	hr
Barrel rear temperature	200 to 220	°C
Barrel middle temperature	230 to 250	°C
Barrel front temperature	250 to 270	°C
Nozzle temperature	240 to 260	°C
Mold temperature	80 to 100	°C
Back pressure	5.00 to 20.0	MPa
Screw speed	50 to 100	rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.