| About |
|---|
| Novalloy-S S3230 is a Polycarbonate + ABS (PC+ABS) product filled with 30% glass fiber. It can be processed by injection molding and is available in North America. Applications of Novalloy-S S3230 include electrical/electronic applications, agricultural, business/office goods, engineering/industrial parts and optics/lenses. Characteristics include: Flame Rated Flame Retardant Creep Resistant Good Dimensional Stability Good Processability&& |
| Product Description | |
|---|---|
| Supplier | Daicel |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,High impact resistance,Good Dimensional Stability,High elastic,Good liquidity,Flame Characteristics,High Heat Resistance,Heat Stabilized,V-0 |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.43 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.10 to 0.30 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 109 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 2.0 | % | ASTM D638 |
| Bending modulus | 7650 | MPa | ASTM D790 |
| bending strength | |||
| yield | 146 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，6.4mm | 69 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 6.35 mm | 125 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 3.1E-5 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric strength | |||
| 1.59 mm | 36 | kV/mm | ASTM D149 |
| Arc resistance | |||
| 3.18 mm | 95.0 | sec | ASTM D495 |
| Compared to the resistance to leakage and marking index | |||
| 3.18 mm | 175 | V | UL 746 |
| High Arc Burning Index (HAI) (1.57 mm) | 58.0 | UL 746 | |
| High voltage arc marking rate (HVTR) (3.18 mm) | 119 | mm/min | UL 746 |
| Hot wire ignition (HWI) (1.57 mm) | 32 | sec | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 1.60 mm, all colors | V-0 | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |