Novalloy-S S4100V

About
Novalloy-S S4100V is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in North America. Applications of Novalloy-S S4100V include electrical/electronic applications, agricultural, business/office goods, engineering/industrial parts and optics/lenses. Characteristics include: Flame Rated Flame Retardant Creep Resistant Good Dimensional Stability Good Processability&&

About

Novalloy-S S4100V is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in North America. Applications of Novalloy-S S4100V include electrical/electronic applications, agricultural, business/office goods, engineering/industrial parts and optics/lenses. Characteristics include: Flame Rated Flame Retardant Creep Resistant Good Dimensional Stability Good Processability&&

Product Description
Supplier	Daicel
Generic	PC+ABS
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,Good Dimensional Stability,High elastic,Good liquidity,Flame Characteristics,High Heat Resistance,V-0
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.23	g/cm³	ISO 1183
Melt Flow Rate
240℃，5.0kg	13	g/10min	ISO 1133
Shrinkage rate	0.40 to 0.60	%	ISO 294-4

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	51.0	MPa	ISO 527-2
Bending modulus	2300	MPa	ISO 178
bending strength	82.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	44	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
B50	114	℃	ISO 306

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
2.00 mm	V-0		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	88 to 110	°C
Drying time	3.0 to 5.0	hr
Recommended maximum moisture content	0.020	%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.