Novalloy-S S7900 (Type G)

About
Novalloy-S S7900 (Type G) is a Polycarbonate + ABS (PC+ABS) material. It is available in Asia Pacific. Primary attribute of Novalloy-S S7900 (Type G): Flame Rated.&&

Product Description
Supplier	Daicel
Generic	PC+ABS
Material Status	Commercial: Active
Features	V-2,V-0,5VB
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ISO 1183
Melt Flow Rate
240℃，5.0kg	13	g/10min	ISO 1133
Shrinkage rate
MD	0.40 to 0.60	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	65.0	MPa	ISO 527-2
Bending modulus	2740	MPa	ISO 178
bending strength	94.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	10	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	96.0	℃	ISO 75-2/A

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
0.75 mm	V-2	UL 94
1.00 mm	V-0	UL 94
2.00 mm	5VB	UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	90 to 100	°C
Drying time	4.0 to 8.0	hr
Barrel rear temperature	220 to 260	°C
Barrel middle temperature	240 to 270	°C
Barrel front temperature	250 to 280	°C
Nozzle temperature	250 to 280	°C
Mold temperature	50 to 80	°C
Back pressure	5.00 to 20.0	MPa
Screw speed	50 to 80	rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.