NOVAPOL® HB-W555-A

About
NOVAPOL® HB-W555-A is a High Density Polyethylene material. It is available in North America for blow molding. Important attributes of NOVAPOL® HB-W555-A are: Food Contact Acceptable High ESCR (Stress Crack Resistant) High Molecular Weight Impact Resistant Rigid Typical applications include: Containers Food Contact Applications Industrial Applications&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Food contact compliance,High molecular weight,High density,High ESCR
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.955	g/cm³	ASTM D792
Melt Flow Rate
190℃，21.6kg	5.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent, F50	> 500	hr	ASTM D1693A

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	28.0	MPa	ASTM D638
Tensile strain
fracture	830	%	ASTM D638
Bending modulus	1400	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	720	J/m	ASTM D256
Tensile impact strength	420	kJ/m²	ASTM D1822

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.