| About |
|---|
| NOVAPOL® LA-0219-A is a Low Density Polyethylene material. It is available in North America for foam processing. Important attributes of NOVAPOL® LA-0219-A are: Food Contact Acceptable Good Processability Good Sealability Good Toughness Typical applications include: Additive/Masterbatch Bags/Liners Foam Food Contact Applications Industrial Applications&& |
| Product Description | |
|---|---|
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,Good heat sealing,Food contact compliance,Low density |
| Availabilitys | North America |
| Process Methods | Foam treatment |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.3 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | |||
| 1% secant | 296 | MPa | ASTM D790 |
| friction coefficient | |||
| Blown film | > 0.60 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 38 | µm | |
| Secant modulus | |||
| 1% secant, TD, 38 µ m, blow molded film | 175 | MPa | ASTM D882 |
| 1% secant, MD, 38 µ m, blow molded film | 150 | MPa | ASTM D882 |
| tensile strength | |||
| yield | 8.80 | MPa | ASTM D638 |
| TD, fracture, 38 µ m, blow molded film | 16.0 | MPa | ASTM D882 |
| TD, yield, 38 µ m, blow molded film | 9.00 | MPa | ASTM D882 |
| MD, fracture, 38 µ m, blow molded film | 18.0 | MPa | ASTM D882 |
| MD, yield, 38 µ m, blow molded film | 10.0 | MPa | ASTM D882 |
| Tensile strain | |||
| fracture | 710 | % | ASTM D638 |
| TD, fracture, 38 µ m, blow molded film | 550 | % | ASTM D882 |
| MD, fracture, 38 µ m, blow molded film | 350 | % | ASTM D882 |
| Drop hammer impact | |||
| 38 µ m, blow molded film | 90 | g | ASTM D1709-A |
| tear strength | |||
| MD, 38 µ m, blow molded film | 230 | g | ASTM D1922 |
| Elmandorf tear strength | |||
| TD, 38 µ m, blow molded film | 150 | g | ASTM D1922 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45 °, 38 µ m, blow molded film | 40 | ASTM D2457 | |
| Haze | |||
| 38 µ m, blow molded film | 12 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Melt Strength | 0.500 | g/3 min | |
| Puncture（38.0 µm） | 450 | J/cm | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Blown Film |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |