| About |
|---|
| NOVAPOL® TR-0740-U is a Linear Low Density Polyethylene material. It is available in North America for rotational molding. Important attributes of NOVAPOL® TR-0740-U are: Flame Rated Antioxidant Food Contact Acceptable Good Processability Hexene Comonomer Typical applications include: Food Contact Applications Plumbing/Piping/Potable Water Consumer Goods Engineering/Industrial Parts Household Applications&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Negative |
| Features | Weather resistance is good,Excellent Processability,High impact resistance,Food contact compliance,Inoxidizability,Low density,Hexene copolymers,HB |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 7.0 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 50 ℃, 10% non-ionic surfactant, molded, F50 | 110 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 1.90 mm, molded | 20.6 | MPa | ASTM D638 |
| Tensile strain | |||
| Yield, 1.90 mm, molded | 12 | % | ASTM D638 |
| Bending modulus | |||
| 1% cut, molded | 915 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| ARM impact roll forming | ARM | ||
| -40℃，3.18 mm | 61.0 | J | ARM |
| -40℃，6.35 mm | 197 | J | ARM |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 60.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 42.0 | ℃ | ASTM D648 |
| Melting temperature | 126 | ℃ | DSC |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |