| About |
|---|
| Product Description | |
|---|---|
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Low density |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.924 | g/cm³ | JIS K7112 |
| Melt Flow Rate | 00.6 | g/10min | JIS K6922-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 53 | HDD | JIS K7215 |
| tensile strength | |||
| yield | MPa | JIS K6922-2 | |
| Tensile strain | |||
| fracture | >400 | ％ | JIS K6922-2 |
| Bending modulus | 280 | MPa | JIS K6922-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 95 | ℃ | JIS K7206 |
| Hot deformation temperature | <-70 | ℃ | ISO 974 |
| melting point | 112 | ℃ | JIS K 7121 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | 190 | MPa | JIS K6922-2 |
| Charpy impact strength | 无破坏 | kJ/m2 | JIS K6922-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |