| About |
|---|
| Novodur® 377 is an injection molding grade of ABS with standard impact strength, high flow and high gloss for electroplating application. FEATURES Standard impact strength High flow Easy flowing APPLICATIONS Home appliances Electrical and electronics General Injection Molding Application Toys, Sport & Leisure&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Good surface appearance,High liquidity |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| TD | 0.40-0.60 | % | ISO 294-4 |
| Melt Flow Rate | |||
| 220℃，10.0kg | 28 | g/10min | ISO 1133 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | 90 | % | ISO 2813 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 95.0 | ℃ | ISO 75-2/Bf |
| 1.8 MPa, annealed | 91.0 | ℃ | ISO 75-2/Af |
| Vicat Softening Temp | |||
| B120 | 98.0 | ℃ | ISO 306/A50 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50mm | HB | UL-94 | |
| 3.00mm | HB | UL-94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 13.0 | kJ/m² | ISO 180-1A |
| Impact strength of cantilever beam notch | |||
| 23℃ | 17.0 | kJ/m² | ISO 180-1A |
| -30℃ | 7.00 | kJ/m² | ISO 180-1A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 112 | R 级 | ISO 2039-2 |
| tensile strength | |||
| Yield, 23 ℃ | 48.0 | MPa | ISO 527-2 |
| Fracture, 23 ℃ | 34.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 20 | % | ISO 527-2 |
| Tensile modulus | |||
| 23℃ | 2500 | MPa | ISO 527-2 |
| bending strength | |||
| 23℃ | 71.0 | MPa | ISO 178 |
| Bending modulus | |||
| 23℃ | 2400 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4h/80°C |
| 3. Rate B (120°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |