NPC PE HD-5403GA

About
HD-5403GA is a medium molecular weight copolymer grade with a broad molecular weight distribution. It is intended for blow molding applications that require high top load resistance and environmental stress crack resistance to meet the most demanding end use applications. APPLICATIONS Blow-molded containersup to 5 liters for packaging: Industrial Chemicals Household Chemicals Foodstuffs Personal Care Products&&

About

HD-5403GA is a medium molecular weight copolymer grade with a broad molecular weight distribution. It is intended for blow molding applications that require high top load resistance and environmental stress crack resistance to meet the most demanding end use applications. APPLICATIONS Blow-molded containersup to 5 liters for packaging: Industrial Chemicals Household Chemicals Foodstuffs Personal Care Products&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Wide molecular weight distribution,Copolymer,High ESCR
Availabilitys	Africa & Middle East ,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.953	g/cm³	ASTM D1505
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.33	g/10min	ASTM D1238
190℃，21.6kg	34	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
10% non-ionic detergent, F50	20.0	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	28.0	MPa	ISO 527-2/2
Tensile strain
fracture	> 900	%	ISO 527-2/2
Bending modulus	1000	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	7.0	kJ/m²	ASTM D256

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	130	℃	ASTM D2117

Supplementary information	Nominal value	Unit
Blow molding barrel temperature	170 to 190	℃
Blow molding mold temperature	175 to 190	℃
Blowing molding temperature	170 to 200	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.