NuSil CV-2287 - SOLIAO

About
Controlled Volatility (CV) Silicone Materials Silicone’s ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil’s Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Low/High Temperature, Flowable, Fast Cure&&

About

Controlled Volatility (CV) Silicone Materials Silicone’s ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil’s Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Low/High Temperature, Flowable, Fast Cure&&

Product Description
Supplier	NuSil
Generic	硅酮
Material Status	Commercial: Active
Features	Good liquidity,Low odor,Fast Cure
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
Supplementary information	Nominal value	Unit	Test method
Cure System	Platinum

Uncured Properties	Nominal value	Unit
colour	Translucent
Density	1.11	g/cm³
viscosity	85	Pa·s
Curing time
150℃	0.50	hr
storage stability	210	min

Cured Properties	Nominal value	Unit
Shore hardness
Shaw’s A	30
tensile strength	5.00	MPa
Tensile strain
fracture	400	%
tear strength	9.63	kN/m
Electrical strength	35	kV/mm

THERMAL	Nominal value	Unit
Linear coefficient of thermal expansion
MD	5.4E-4	1/℃
Thermosetting components
Component A	按重量计算的混合比: 10
Component B	按重量计算的混合比: 1.0

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.