| About |
|---|
| The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone’s ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil’s capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: Lap Shear after 7 days 275 psi (1.9 MPa)&& |
| Product Description | |
|---|---|
| Supplier | NuSil |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Conductive,Fuel resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Tack Free Time | 15.0 | min | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Cure System | Acetoxy | ||
| working temperature | -50 to 200 | ℃ |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | Grey | ||
| Density | 1.48 | g/cm³ | |
| Curing time | |||
| 23℃ | 72 | hr |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 40 | ||
| lap shear strength | 1.90 | MPa | |
| tensile strength | 4.83 | MPa | |
| Tensile strain | |||
| fracture | 280 | % | |
| tear strength | 8.76 | kN/m |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Primed with SP-120 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |