NuSil FS1-3730

About
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone’s ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil’s capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: Bonds Aggressively&&

Product Description
SupplierNuSil
Generic硅酮
Material StatusCommercial: Active
FeaturesConductive,Agglomerability,Fuel resistance
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
THERMALNominal valueUnitTest method
Tack Free Time30.0min

Supplementary informationNominal valueUnitTest method
Cure SystemAcetoxy 
Extrusion rate150g/min
working temperature-50 to 200

Uncured PropertiesNominal valueUnitTest method
colourTranslucent 
Density1.40g/cm³
Curing time
23℃1.7E+2hr

Cured PropertiesNominal valueUnitTest method
Shore hardness
Shaw’s A35 
lap shear strength1.90MPa
tensile strength5.86MPa
Tensile strain
fracture430%
tear strength10.5kN/m

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.