NuSil MED-1511

About
NuSil Technology’s unrestricted materials may be considered for long-term implant applications (greater than 29 days). Silicone adhesives are elastomers or pressure sensitive adhesive systems that are designed to bond silicone surfaces to each other and to other substrate surfaces such as metals and plastics. There are one-part and two-part adhesives, ranging in consistency from flowable to non-flowable (non-slump). In general, silicone adhesives adhere well to substrates such as glass, aluminum, titanium, other silicones, and some ceramics. While various types of materials can be used as adhesives, silicones are consistently chosen for their many inherent properties and overall versatility. Comments: FLOWABLE&&

About

NuSil Technology’s unrestricted materials may be considered for long-term implant applications (greater than 29 days). Silicone adhesives are elastomers or pressure sensitive adhesive systems that are designed to bond silicone surfaces to each other and to other substrate surfaces such as metals and plastics. There are one-part and two-part adhesives, ranging in consistency from flowable to non-flowable (non-slump). In general, silicone adhesives adhere well to substrates such as glass, aluminum, titanium, other silicones, and some ceramics. While various types of materials can be used as adhesives, silicones are consistently chosen for their many inherent properties and overall versatility. Comments: FLOWABLE&&

Product Description
Supplier	NuSil
Generic	硅酮
Material Status	Commercial: Active
Features	Good liquidity,Biocompatible,Moisture resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
Supplementary information	Nominal value	Unit	Test method
Cure System	Acetoxy
Extrusion rate	100	g/min

Uncured Properties	Nominal value	Unit
Density	1.12	g/cm³
Curing time
23℃	72	hr
storage stability
25 ℃	< 10	min

Cured Properties	Nominal value	Unit
Shore hardness
Shaw’s A	25
tensile strength	9.65	MPa
200% strain	0.758	MPa
Tensile strain
fracture	750	%
tear strength	17.5	kN/m

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.