| About |
|---|
| NuSil Technology’s unrestricted materials may be considered for long-term implant applications (greater than 29 days). Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: LOW VISCOSITY, RAPID RTV CURE&& |
| Product Description | |
|---|---|
| Supplier | NuSil |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Low Viscosity,Room temperature cure,Fast Cure |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 1.0 | ||
| Component B | 按重量计算的混合比: 1.0 | ||
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Cure System | Platinum |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | |
| viscosity | |||
| — | 17 | Pa·s | |
| — | 20 | Pa·s | |
| Curing time | |||
| 150℃ | 0.25 | hr | |
| storage stability | |||
| 25 ℃ | 3.0 | min |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 20 | ||
| tensile strength | 3.79 | MPa | |
| 200% strain | 0.689 | MPa | |
| Tensile strain | |||
| fracture | 480 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Part B |
| 3. Part A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |