NuSil R-2630 - SOLIAO

About
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone’s ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil’s capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Static Dissipative Comment: 7 ohm-cm, Low viscosity&&

About

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone’s ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil’s capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Static Dissipative Comment: 7 ohm-cm, Low viscosity&&

Product Description
Supplier	NuSil
Generic	硅酮
Material Status	Commercial: Active
Features	Conductive,Low Viscosity,Fuel resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
THERMAL	Nominal value	Unit	Test method
Thermosetting components
Component A	按重量计算的混合比: 10
Component B	按重量计算的混合比: 1.0

Supplementary information	Nominal value	Unit	Test method
Cure System	Platinum
working temperature	-50 to 200	℃

Uncured Properties	Nominal value	Unit
colour	Black
Density	1.09	g/cm³
viscosity	9.4	Pa·s
Curing time
150℃	0.50	hr
storage stability	600	min

Cured Properties	Nominal value	Unit
Shore hardness
Shaw’s A	60
tensile strength	4.83	MPa
Tensile strain
fracture	95	%
tear strength	6.13	kN/m
Electrical strength	0.39	kV/mm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.