Nycast 6PA - SOLIAO

About
Cast Nylons standard grades have delivered successful performance with and without lubrication in a wide variety of applications, particularly as a bearing material. They are light-weight, offer extremely good wear resistance, high tensile strength and high module of elasticity. This material is an off white unmodified type 6 nylon which is FDA, USDA, and 3A dairy compliant and can be used in the food industry. Cast Nylons Limited offers NYCAST 6PA Natural in more standard sizes that any manufacturer in the industry. The ability to cast nylon vs. extrusion allows Cast Nylons Limited to create custom Near Net Shapes with ease for special applications. Cast Nylons Limited also has the capability to produce NYCAST 6PA in 12 different colors. Custom colors are available as well. Typical applications for NYCAST 6PA Natural would include: Bearings, Wear Pads Gears, Valve seals Pulleys, Sprockets Sheaves, Wear Plate Wear Shoes, Thrust Washers Components in Food Processing Industry&&

About

Cast Nylons standard grades have delivered successful performance with and without lubrication in a wide variety of applications, particularly as a bearing material. They are light-weight, offer extremely good wear resistance, high tensile strength and high module of elasticity. This material is an off white unmodified type 6 nylon which is FDA, USDA, and 3A dairy compliant and can be used in the food industry. Cast Nylons Limited offers NYCAST 6PA Natural in more standard sizes that any manufacturer in the industry. The ability to cast nylon vs. extrusion allows Cast Nylons Limited to create custom Near Net Shapes with ease for special applications. Cast Nylons Limited also has the capability to produce NYCAST 6PA in 12 different colors. Custom colors are available as well. Typical applications for NYCAST 6PA Natural would include: Bearings, Wear Pads Gears, Valve seals Pulleys, Sprockets Sheaves, Wear Plate Wear Shoes, Thrust Washers Components in Food Processing Industry&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Features	High impact resistance,High elastic,Machinable,High Heat Resistance,Good Tensile Strength,Good wear resistance,HB
Availabilitys	North America
Process Methods	casting

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.15 to 1.17	g/cm³	ASTM D792
Water absorption rate			ASTM D570
24hr	0.50 to 0.60	%	ASTM D570
saturated	5.0 to 6.0	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	37 to 48	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	204 to 221	℃	ASTM D648
1.8 MPa, unannealed	93.3 to 204	℃	ASTM D648
Continuous use temperature	110	℃	ASTM D794
Melting temperature	227 to 238	℃
Linear coefficient of thermal expansion
MD	1.1E-4	1/℃	ASTM D696
Operating temperature
Intermittent	166	℃

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	20 to 24	kV/mm	ASTM D149
Dielectric constant			ASTM D150
60 Hz	3.70		ASTM D150
1 kHz	3.70		ASTM D150
100 kHz	3.70		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	78 to 83		ASTM D2240
Rockwell hardness
R-level	115 to 125		ASTM D785
Tensile modulus	2760 to 3790	MPa	ASTM D638
tensile strength	68.9 to 93.1	MPa	ASTM D638
Tensile strain
fracture	20 to 55	%	ASTM D638
Bending modulus	2900 to 3450	MPa	ASTM D790
bending strength	107 to 121	MPa	ASTM D790
Compression modulus	2240 to 2760	MPa	ASTM D695
compressive strength	93.1 to 110	MPa	ASTM D695
shear strength	68.9 to 75.8	MPa	ASTM D732
friction coefficient
With oneself – dynamic	0.22		ASTM D1894
Load deformation	0.500 to 2.50	%	ASTM D621

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.