| About |
|---|
| Nycast Elastalon是一种聚酰胺 6 弹性体（尼龙 6 弹性体）材料,。 该产品在北美洲有供货,加工方式为:浇铸。 Nycast Elastalon的主要特性为:耐冲击。&& |
| Product Description | |
|---|---|
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | High impact resistance |
| Availabilitys | North America |
| Process Methods | casting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 2.8 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 1100 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 190 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 63.9 | ℃ | ASTM D648 |
| Continuous use temperature | 98.9 | ℃ | ASTM D794 |
| Melting temperature | 221 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | ASTM D150 | ||
| 1 kHz | 60.0 | ASTM D150 | |
| 1 MHz | 5.00 | ASTM D150 | |
| Dissipation factor | ASTM D150 | ||
| 1 kHz | 0.75 | ASTM D150 | |
| 1 MHz | 0.16 | ASTM D150 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 68 | ASTM D2240 | |
| Rockwell hardness | |||
| R-level | 74 | ASTM D785 | |
| Tensile modulus | 752 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| yield | 26.9 | MPa | ASTM D638 |
| fracture | 44.7 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 300 | % | ASTM D638 |
| Bending modulus | 724 | MPa | ASTM D790 |
| Compression modulus | 1220 | MPa | ASTM D695 |
| compressive strength | 31.0 | MPa | ASTM D695 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |