| About |
|---|
| NYCOA 1485 HS is a heat stabilized Nylon copolymer TPE which offers outstanding toughness, flexibility, and strength. It is particularly suitable for extrusion processing. The chemical composition of NYCOA 1485 HS delivers improved impact performance at ambient or low temperatures, and increased flexibility to meet higher impact performance. The high thermal and chemical resistance, inherent to Nylon 6, is retained. The chemistry of the resin promotes good adhesion to olefins and other materials. This product is available with custom additive packages: UV stabilizer, flame retardant and custom colors. Typical applications include convoluted tubing, complex profiles, and pipe extrusion.&& |
| Product Description | |
|---|---|
| Generic | PA+TPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Good flexibility,Good bond,Copolymer,Solvent resistance,low-temperature impact resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 235℃，1.0kg | 3.0 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| 24hr | 2.0 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 50.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 300 | % | ASTM D638 |
| Bending modulus | 600 | MPa | ASTM D790 |
| bending strength | 22.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 6.4mm | 330 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 205 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 71 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Barrel rear temperature | 216 to 227 | °C | |
| Barrel middle temperature | 221 to 238 | °C | |
| Barrel front temperature | 232 to 249 | °C | |
| Nozzle temperature | 243 to 260 | °C | |
| Processing (melt) temperature | 243 to 254 | °C | |
| Mold temperature | 21 to 49 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |