NYLOY® MG-1020NM-1

About
NYLOY® MG-1020NM-1 is a Polyamide 66 (Nylon 66) material filled with 20% glass fiber. It is available in Asia Pacific or North America. Primary attribute of NYLOY® MG-1020NM-1: Impact Modified.&&

Product Description
Supplier	Nytex
Generic	PA66
Material Status	Commercial: Active
Features	High impact resistance
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density
—	1.06	g/cm³	ASTM D792
—	1.23	g/cm³	ISO 1183
Shrinkage rate
MD	0.59	%	ASTM D955
TD	1.1	%	ASTM D955
TD	1.1	%	ISO 294-4
MD	0.59	%	ISO 294-4

MECHANICAL	Nominal value	Unit	Test method
tensile strength
—	110	MPa	ASTM D638
—	112	MPa	ISO 527-2
Tensile strain
fracture	4.0	%	ASTM D638
fracture	3.5	%	ISO 527-2
Bending modulus	5300	MPa	ASTM D790 , ISO 178
bending strength
—	162	MPa	ASTM D790
—	160	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	15	kJ/m²	ISO 179/1eA
23℃	20	kJ/m²	ISO 179/1eA
Impact strength of cantilever beam notch			ASTM D256
-20℃，3.2mm	120	J/m	ASTM D256
23℃，3.2mm	200	J/m	ASTM D256

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.