NYLOY® MG-2012N-V0

About
NYLOY® MG-2012N-V0 is a Polyamide 66 (Nylon 66) material filled with 12% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of NYLOY® MG-2012N-V0 are: Flame Rated Flame Retardant&&

Product Description
Supplier	Nytex
Generic	PA66
Material Status	Commercial: Active
Features	Flame Characteristics,V-0
Availabilitys	North America,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.28	g/cm³	ASTM D792
Shrinkage rate			ASTM D955
MD	0.61	%	ASTM D955
TD	1.1	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	74	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	210	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	117		ASTM D785
tensile strength	110	MPa	ASTM D638
Tensile strain
fracture	2.7	%	ASTM D638
Bending modulus	5470	MPa	ASTM D790
bending strength	162	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	260 to 290	°C
Mold temperature	80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.