| About |
|---|
| Clear Polyethylene Terephthalate (PET) sheet. Plastic packaging products.&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Food contact compliance,Amorphous |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.33 | g/cm³ | ASTM D1503 |
| Thickness | 200.0 to 1200.0 | µm | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | 200 to 1200 µm | ||
| tensile strength | |||
| MD, fracture | 55.3 to 62.2 | MPa | ASTM D882 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | > 90.0 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Core ID | 152 | mm | |
| Denest/Anti-block Treatment | |||
| Available | Internal Anti-block Structure | ||
| Standard | Surface Silicone Coating | ||
| Roll Outer Diameter | 100.00 | cm | |
| Temperature of hot forming mold | 121 to 154 | ℃ | |
| Width（of sheet） | < 168.00 | cm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Variation: ±1% |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |