OLEFISTA™ QX1219D/QCM292

About
OLEFISTA™ QX1219D/QCM292 is a Specialty Elastomer material. It is available in Asia Pacific.&&

Product Description
Supplier	Mitsubishi
Generic	特殊弹性体
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.48	g/cm³	JIS K7112

elastic body	Nominal value	Unit	Test method
tensile strength
fracture	16.0	MPa	JIS K6251
100% strain	13.0	MPa	JIS K6251
Tensile strain
fracture	200	%	JIS K6251

Aging performance	Nominal value	Unit	Test method
The rate of change in tensile strength in air
150℃，168 hr	130	%	JIS K7113
Changes in tensile stress during fracture in air
150℃，168 hr	90	%	JIS K7113

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-60.0	℃	JIS K6723

Electrical performance	Nominal value	Unit	Test method
Volume resistivity
30 ℃	5.0E+13	ohms·cm	JIS K6723

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index	35	%	JIS K7201

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	95
Load deformation
120℃	1.00	%	JIS K6723

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.