OmniPro™ TPO 20M HC

About
High Impact Resistance, Easy Flow, Enhanced Clarity, Thermoplastic Polyolefin&&

Product Description
Generic	Polyolefin Elastomer
Material Status	Commercial: Active
Features	High impact resistance,Good liquidity,HB
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.898	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	18	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 23 ℃	19.3	MPa	ASTM D638
Bending modulus	758	MPa	ASTM D790
bending strength	21.4	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-30℃，3.2mm	320	J/m	ASTM D256
23℃，3.2mm	No Break		ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, 3.2 mm	65.6	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		Internal Method

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	204 to 249	°C
Barrel middle temperature	216 to 260	°C
Barrel front temperature	216 to 260	°C
Nozzle temperature	216 to 260	°C
Processing (melt) temperature	216 to 260	°C
Mold temperature	27 to 60	°C
Back pressure	0.345 to 0.689	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.