OnFlex™ S FR 40A-3S1841

About
OnFlex™-S FR thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially flame retarded with a highly effective, RoHS compliant halogen based flame retardant system. Furthermore, OnFlex™-S FR compounds offer excellent mechanical properties, good elevated temperature compression set performance, very wide hardness range and good processability.&&

About

OnFlex™-S FR thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially flame retarded with a highly effective, RoHS compliant halogen based flame retardant system. Furthermore, OnFlex™-S FR compounds offer excellent mechanical properties, good elevated temperature compression set performance, very wide hardness range and good processability.&&

Product Description
Supplier	Polyone
Generic	TPE
Material Status	Commercial: Active
Features	Flame Characteristics,Halogenated,V-0
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	40		ISO 868

elastic body	Nominal value	Unit	Test method
tensile strength			ISO 37
fracture	4.50	MPa	ISO 37
100% strain	1.10	MPa	ISO 37
300% strain	3.10	MPa	ISO 37
Tensile strain
fracture	430	%	ISO 37
tear strength	18	kN/m	ISO 34-1
Compression deformation			ISO 815
23℃，72 hr	14	%	ISO 815
70℃，22 hr	27	%	ISO 815
100℃，22 hr	47	%	ISO 815

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	V-0		UL 94
Glowing wire flammability index
2.0 mm	960	℃	IEC 60695-2-12
Extreme oxygen index	27	%	ISO 4589-2

Supplementary information	Nominal value	Unit	Test method
Common material types	苯乙烯类热塑性弹性体 (TES

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	200 to 220	°C
Mold temperature	40 to 60	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.