Optimum® 800 MF

About
BRALEN FB 08-64 is a film grade of low density polyethylene. This grade is additives free. Applications BRALEN FB 08-64 is used for the production of non-slip shrink for collation packaging and technical films. Recommended film thickness is 0.04 – 0.10 mm. This grade can be used also for extrusion of small profiles. BRALEN FB 08-64 is suitable for food contact. The product complies with Food Contact Regulations.&&

About

BRALEN FB 08-64 is a film grade of low density polyethylene. This grade is additives free. Applications BRALEN FB 08-64 is used for the production of non-slip shrink for collation packaging and technical films. Recommended film thickness is 0.04 – 0.10 mm. This grade can be used also for extrusion of small profiles. BRALEN FB 08-64 is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PCTG
Material Status	Commercial: Active
Features	Renewable resources,Food contact compliance,Low density,HB
Availabilitys	Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ASTM D792
Melt Flow Rate
300℃，1.20kg	50	g/10min	ASTM D1238
Shrinkage rate
MD	0.50 to 0.80	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	48.3	MPa	ASTM D638
Tensile strain
fracture	120	%	ASTM D638
Bending modulus	2070	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	640	J/m	ASTM D256
Dart impact equipped with measuring instruments	36.2	J	ASTM D3763

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, 3.2 mm	125	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.