Optix® CA-927 HF CLEAR

About
Optix® CA-927 HF CLEAR is a Polymethyl Methacrylate Acrylic material. It is available in North America for injection molding. Important attributes of Optix® CA-927 HF CLEAR are: High Flow Impact Modified&&

Product Description
Generic	PMMA
Material Status	Commercial: Active
Features	High impact resistance,High liquidity
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.15	g/cm³	ASTM D792
Melt Flow Rate	12	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2380	MPa	ASTM D638
tensile strength	49.6	MPa	ASTM D638
Tensile strain
fracture	25	%	ASTM D638
Bending modulus	1860	MPa	ASTM D790
bending strength	48.3	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	43	J/m	ASTM D256
Drop hammer impact	3.16	J	ASTM D3029

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	73.3	℃	ASTM D648
Vicat Softening Temp	108	℃	ASTM D1525

optical performance	Nominal value	Unit	Test method
Transmittance	90.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.