| About |
|---|
| Devlon T100是一种热塑性的材料,。 该产品在欧洲有供货,。&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | SMMA |
| Material Status | Commercial: Active |
| Features | Self-extinguishing |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | Internal Method | ||
| — | 1.07 | g/cm³ | Internal Method |
| — | 1.14 | g/cm³ | Internal Method |
| Shrinkage rate | |||
| MD | 6.0 | % | Internal Method |
| Water absorption rate | |||
| 24hr | 0.11 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 57 | Internal Method |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| flash point | |||
| Before Cure | 132 | ℃ |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.475 | Internal Method | |
| Transmittance | 92.5 | % | Internal Method |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Initial weight loss temperature | |||
| 5% Weight Loss | 328 | ℃ |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 100 | ℃ | Internal Method |
| Glass transition temperature | 100 | ℃ | Internal Method |
| Linear coefficient of thermal expansion | |||
| MD | 6.2E-5 | 1/℃ | Internal Method |
| Storage period | 26 | wk |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |