OPTODYNE™ UV-3100

About
OPTODYNE™ UV-3100 Optodyne UV-3100 is a single component, epoxy-based UV curable adhesive designed for bonding optical connectors, lenses, prisms and other optical components. Its exceptional strength, combined with its unique index matching capability, make the Optodyne Series of adhesives superior in many respects: Excellent water resistance Exceptional bonding strength Superior transparency Rapid cure&&OPTODYNE™ UV-3100 OPTODYNE UV is a new ultraviolet ray-cured, clear optical bonding agent which uses fluorinated epoxy and fluorinated epoxy acrylate resin as its base. In addition to capability of bonding and fastening, refractive index consistency to form optimal optical linkage is required for the bonding agent used in optical paths such as optical fiber connections. OPTODYNE UV is a reliable adhesive which provides refractive index consistency and is also durable and easy to use. Applications Connections of optical fiber (quartz), BK-7 glass.&&

About

OPTODYNE™ UV-3100 Optodyne UV-3100 is a single component, epoxy-based UV curable adhesive designed for bonding optical connectors, lenses, prisms and other optical components. Its exceptional strength, combined with its unique index matching capability, make the Optodyne Series of adhesives superior in many respects: Excellent water resistance Exceptional bonding strength Superior transparency Rapid cure&&OPTODYNE™ UV-3100 OPTODYNE UV is a new ultraviolet ray-cured, clear optical bonding agent which uses fluorinated epoxy and fluorinated epoxy acrylate resin as its base. In addition to capability of bonding and fastening, refractive index consistency to form optimal optical linkage is required for the bonding agent used in optical paths such as optical fiber connections. OPTODYNE UV is a reliable adhesive which provides refractive index consistency and is also durable and easy to use. Applications Connections of optical fiber (quartz), BK-7 glass.&&

Product Description
Supplier	Daikin Fluorochemicals
Generic	环氧树脂
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Low or no water absorption,UV Cure,Durability,Fast Cure,Agglomerability
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density			Internal Method
—	1.36	g/cm³	Internal Method
—	1.38	g/cm³	Internal Method
Shrinkage rate
MD	3.0	%	Internal Method
Water absorption rate
24hr	0.11	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	80		Internal Method

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
flash point
Before Cure	127	℃

optical performance	Nominal value	Unit	Test method
Refractive index	1.471		Internal Method
Transmittance	93.6	%	Internal Method

Thermosetting mixed viscosity	Nominal value	Unit	Test method

Supplementary information	Nominal value	Unit	Test method
Initial weight loss temperature
5% Weight Loss	312	℃

THERMAL	Nominal value	Unit	Test method
Continuous use temperature	100	℃	Internal Method
Glass transition temperature	130	℃	Internal Method
Linear coefficient of thermal expansion
MD	9.0E-5	1/℃	Internal Method
Storage period	26	wk

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.