| About |
|---|
| Linear low-density polyethylene based tie resin for film coextrusion OREVAC® 18300 is a maleic anhydride modified linear low-density polyethylene adhesive resin. It is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyolefin. Applications OREVAC® 18300 has been designed to develop a reliable bonding strength in coextrusion processes between polyethylene or ethylene copolymers and different materials among which polyamides and EVOH. OREVAC® 18300 is recommended for cast or blown film coextrusion. For more detailed information and recommendations regarding your specific application, please contact your local ARKEMA technical representative.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good bond,Agglomerability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.916 | g/cm³ | ASTM D1505 |
| Density | 0.916 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.3 | g/10min | ASTM D1238 |
| 190℃，2.16kg | 2.3 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 85.0 | ℃ | ASTM D1525 3 |
| Vicat Softening Temp | 85.0 | ℃ | ISO 306/A |
| Melting temperature | 120 | ℃ | ISO 11357-3 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 190 to 200 | °C | |
| Barrel 2 zone temperature | 200 | °C | |
| Barrel 3 zone temperature | 200 to 210 | °C | |
| Barrel 4 zone temperature | 210 to 220 | °C | |
| Barrel 5 zone temperature | 220 to 230 | °C | |
| Connector temperature | 220 to 240 | °C | |
| Nozzle temperature | 220 to 240 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. On compression molded samples |
| 3. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |