| About |
|---|
| Linear low-density polyethylene tie resin for metallized cast film OREVAC® 18317 is a maleic anhydride modified linear low-density polyethylene adhesive resin. It is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyolefin. Applications OREVAC® 18317 has been specifically designed to be used as a metal adhesion enhancer in metallized cast PP films.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good bond,Low density,Metallized,Agglomerability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.902 | g/cm³ | ISO 1183 , ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ASTM D1238，ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 81.0 | ℃ | ISO 306/A , ASTM D1525 3 |
| Melting temperature | 98.0 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |