| About |
|---|
| OREVAC® 18360 is a maleic anhydride modified low-density polyethylene available in pellet form. It can be processed on most extrusion equipments designed to process conventional polyolefins. Applications OREVAC® 18360 has been designed to develop a reliable bonding strength between polyethylenes or most ethylene copolymers and many kinds of different materials among which polyamides and EVOH. OREVAC® 18360 can be processed within different extrusion and coextrusion technologies including blown film, blow moulding and tube coextrusion.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good bond |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.914 | g/cm³ | ASTM D1505 |
| Density | 0.914 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| 190℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 87.0 | ℃ | ASTM D1525 2 |
| Vicat Softening Temp | 87.0 | ℃ | ISO 306/A |
| Melting temperature | 120 | ℃ | ISO 11357-3 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 160 to 180 | °C | |
| Barrel 2 zone temperature | 180 to 200 | °C | |
| Barrel 3 zone temperature | 200 to 220 | °C | |
| Barrel 4 zone temperature | 210 to 230 | °C | |
| Barrel 5 zone temperature | 220 to 230 | °C | |
| Nozzle temperature | 220 to 240 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |