| About |
|---|
| OREVAC® 18410/18342N is a maleic anhydride modified high-density polyethylene used in pipe-coating technology for multi-layer structures. It is available in pellet form for use in conventional extrusion equipment designed to process polyolefin. Applications OREVAC® 18410/18342N has been designed to develop a reliable bonding strength onto FBE (Fusion Bonded Epoxy) steel pipe protective layer. It is mainly used as tie layer in three-layer high-density polyethylene coatings (epoxy primer / adhesive / polyethylene), where mechanical and adhesive performances at high temperatures are required.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Agglomerability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Density | 0.930 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.5 | g/10min | ASTM D1238 |
| 190℃，2.16kg | 3.5 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, molded | 59 | ISO 868 | |
| Shaw’s D, molded | 59 | ASTM D2240 | |
| Tensile modulus | |||
| Compression Molding | 310 | MPa | ASTM D638 |
| Compression Molding | 310 | MPa | ISO 527-2 |
| tensile strength | |||
| Fracture, molded | > 20.0 | MPa | ISO 527-2 |
| Fracture, molded | > 20.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | > 600 | % | ISO 527-2 |
| Fracture, molded | > 600 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 110 | ℃ | ASTM D1525 3 |
| Vicat Softening Temp | 110 | ℃ | ISO 306/A |
| Melting temperature | 125 | ℃ | ISO 11357-3 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 190 to 200 | °C | |
| Barrel 2 zone temperature | 200 | °C | |
| Barrel 3 zone temperature | 200 to 210 | °C | |
| Barrel 4 zone temperature | 210 to 220 | °C | |
| Barrel 5 zone temperature | 220 to 230 | °C | |
| Nozzle temperature | 220 to 240 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. On compression molded samples |
| 3. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |