| About |
|---|
| Greene, Tweed offers precision-molded thermoplastic components made from our high-performance Orthtek® composite materials for a variety of demanding medical and biotechnology applications. Orthtek WF compnents work well as metal replacement, and dimensional stability. Orthtek WF is recommended applications such as nail guides and retractors where radiolucentcy and autoclaving are required.&& |
| Product Description | |
|---|---|
| Generic | PEEK |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Dimensional Stability,Steam sterilized,E-beam disinfection,Corrosion Resistant,High pressure disinfection,Radioactive,Radiation disinfection,Durability,High pressure heat resistance |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.54 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| Saturation, 100 ℃ | 0.050 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 60000 | MPa | ASTM D3039 |
| tensile strength | |||
| fracture | 627 | MPa | ASTM D3039 |
| Tensile strain | |||
| fracture | 1.0 | % | ASTM D3039 |
| Bending modulus | 48300 | MPa | ASTM D790 |
| bending strength | 827 | MPa | ASTM D790 |
| Compression modulus | 55200 | MPa | ASTM D6641 |
| compressive strength | 572 | MPa | ASTM D6641 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Fiber Tow Size | 3K |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 48 hrs |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |