Osterlene® HD0752

About
HD0752 is a high density polyethylene resin and is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength. Applications for HD0752 include injection molding, for injection molded pails, industrial parts and other shipping containers. This product has excellent impact strength, stress crack resistance and processability. It has a very narrow molecular weight distribution. HD0752 has no slip, antiblock or processing aids. HD0752 complies with U.S. FDA 21 CFR 177.1520 (c)3.1a, Canadian HPFB No Objection, EU, No 10/2011, U.S. USP, U.S. FDA DMF.&&

About

HD0752 is a high density polyethylene resin and is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength. Applications for HD0752 include injection molding, for injection molded pails, industrial parts and other shipping containers. This product has excellent impact strength, stress crack resistance and processability. It has a very narrow molecular weight distribution. HD0752 has no slip, antiblock or processing aids. HD0752 complies with U.S. FDA 21 CFR 177.1520 (c)3.1a, Canadian HPFB No Objection, EU, No 10/2011, U.S. USP, U.S. FDA DMF.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Excellent Processability,High impact resistance,Weight distribution,High ESCR
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.950	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	6.8	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 100% non-ionic surfactant, F50	12.0	hr	ASTM D1693A

IMPACT	Nominal value	Unit	Test method
Tensile impact strength	84.1	kJ/m²	ASTM D1822

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	72.8	℃	ASTM D648
Embrittlement temperature	< -76.0	℃	ASTM D746
Vicat Softening Temp	128	℃	ASTM D1525
Melting temperature	131	℃	DSC
Crystallization peak temperature
DSC	118	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	59		ASTM D2240
tensile strength			ASTM D638
yield	26.9	MPa	ASTM D638
fracture	22.8	MPa	ASTM D638
Tensile strain			ASTM D638
yield	7.0	%	ASTM D638
fracture	1100	%	ASTM D638
Bending modulus
2% secant	1070	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.