Osterlene® HD500-GP

About
HD500-GP is a copolymer with a narrow molecular weight distribution. It provides high impact strength, excellent color, low odor and good processing stability. Typical applications for HD500-GP include, open head pails and large shippiing containers. HD500-GP meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in “…articles or components of articles intended for use in contact with food.” Specific limitations may apply. Contact your Osterman sales representative for more information.

About

HD500-GP is a copolymer with a narrow molecular weight distribution. It provides high impact strength, excellent color, low odor and good processing stability. Typical applications for HD500-GP include, open head pails and large shippiing containers. HD500-GP meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in “…articles or components of articles intended for use in contact with food.” Specific limitations may apply. Contact your Osterman sales representative for more information.

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Excellent Processability,High impact resistance,Food contact compliance,Low odor,Weight distribution,Copolymer,High density,Good coloring
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.953	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	4.5	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit
Tensile modulus
—	1020	MPa
1% secant	808	MPa
tensile strength
yield	28.0	MPa
fracture	> 29.0	MPa
Tensile strain
yield	9.0	%
fracture	> 2000	%
Bending modulus
—	1370	MPa
1% secant	1290	MPa
2% secant	1060	MPa

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	44	J/m	ASTM D256
Notched impact strength of cantilever beam
-18℃	无断裂		ASTM D4812

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	73.3	℃	ASTM D648
Embrittlement temperature	< -76.0	℃	ASTM D746
Vicat Softening Temp	126	℃	ASTM D1525
Melting temperature	131	℃	ASTM D3418
Crystallization peak temperature
DSC	117	℃	ASTM D3418

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.