| About |
|---|
| HM0595 is a high molecular weight high density copolymer that provides broad bimodal molecular weight distribution, high stiffness and good heat seal response and strength. Applications for Osterlene HM0595 include merchandise bags, grocery sacks, trash can liners, produce bags and roll stock. HM0595 meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulation allows the use of this olefin polymer in “…articles or components of articles intended for use in contact with food…” Specific limitations or conditions of use may apply. Contact your Osterman Sales Representative for more information.&& |
| Product Description | |
|---|---|
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good heat sealing,Food contact compliance,High molecular weight,Copolymer,High density,Bimodal molecular weight distribution |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.060 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 13 | µm | |
| Secant modulus | |||
| 1% secant, MD: 13 µ m | 965 | MPa | |
| 1% secant, TD: 13 µ m | 1100 | MPa | |
| tensile strength | |||
| MD, yield, 13 µ m | 35.2 | MPa | |
| TD, yield, 13 µ m | 31.0 | MPa | |
| MD, fracture, 13 µ m | 79.3 | MPa | |
| TD, fracture, 13 µ m | 65.5 | MPa | |
| Tensile strain | |||
| MD, fracture, 13 µ m | 300 | % | |
| TD, fracture, 13 µ m | 400 | % | |
| Drop hammer impact | |||
| 13 µm | 350 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD：13 µm | 10 | g | |
| TD：13 µm | 80 | g |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Blow（up Ratio） | 4:1 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |