| About |
|---|
| LD200-SAHC is designed for applications requiring clarity, strength and stiffness. LD200-SAHC exhibits good processability and clarity. Uses for this resin include, bags, film, packaging. LD200-SAHC meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in “…articles or components of articles intended for use in contact with food.” Specific limitations may apply. Contact your Osterman sales representative for more information.&& |
| Product Description | |
|---|---|
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good Clarity,Food contact compliance,Low density |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.921 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| 1% secant, MD | 193 | MPa | |
| 1% secant, TD | 228 | MPa | |
| tensile strength | |||
| MD, yield | 10.3 | MPa | |
| TD, yield | 7.58 | MPa | |
| MD, fracture | 26.2 | MPa | |
| TD, fracture | 22.8 | MPa | |
| Tensile strain | |||
| MD, fracture | 300 | % | |
| TD, fracture | 510 | % | |
| Drop hammer impact | 90 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD | 350 | g | |
| TD | 200 | g |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 94.0 | ℃ | ASTM D1525 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 75 | ASTM D2457 | |
| Haze | 5.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |