| About |
|---|
| LLB50026-G is a linear low density polyethylene resin designed to provide good processability and ease of blending. This resin is in granular form which makes for efficient blending with pigments, slip additives and antiblock additives. LLB50026-G has no slip, antiblock or processing aid but it does contain thermal stabilizer.&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Butylene copolymer,Heat Stabilized |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.926 | g/cm³ | Internal Method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 52 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -76.1 | ℃ | ASTM D746 |
| Melting peak temperature | 122 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 15 seconds | 51 | ASTM D2240 | |
| tensile strength | |||
| yield | 15.2 | MPa | |
| fracture | 7.58 | MPa | |
| Tensile strain | |||
| fracture | 40 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 448 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |