| About |
|---|
| OXPEKK® IG205BS is a Polyetherketoneketone (PEKK) material filled with 5.0% barium sulfate. It is available in Europe or North America. Primary attribute of OXPEKK® IG205BS : Crystalline.&& |
| Product Description | |
|---|---|
| Generic | PEKK |
| Material Status | Commercial: Active |
| Features | Crystal |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.46 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | < 1.4 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 4360 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| yield | 117 | MPa | ASTM D638 |
| fracture | 89.6 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 5.0 | % | ASTM D638 |
| fracture | 8.0 | % | ASTM D638 |
| Bending modulus | 4610 | MPa | ASTM D790 |
| bending strength | |||
| 5% strain | 193 | MPa | ASTM D790 |
| Compression modulus | 6490 | MPa | ASTM D695 |
| compressive strength | ASTM D695 | ||
| 20% strain | 145 | MPa | ASTM D695 |
| 40% strain | 228 | MPa | ASTM D695 |
| Compressive strain | 6.0 | % | ASTM D695 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 38 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 163 | ℃ | DSC |
| Melting temperature | 360 | ℃ | DSC |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. at Maximum |
| 3. 2% offset yield |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |