OXPEKK® IG240C

About
OXPEKK® IG240C is a Polyetherketoneketone (PEKK) material filled with 40% carbon fiber. It is available in Europe or North America. Typical application of OXPEKK® IG240C: Medical/Healthcare&&

Product Description
Generic	PEKK
Material Status	Commercial: Active
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.47	g/cm³	ASTM D792
Shrinkage rate
MD	0.050	%	ASTM D955
Water absorption rate
24hr	< 0.030	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	3500	MPa	ASTM D638
tensile strength
fracture	269	MPa	ASTM D638
Tensile strain
fracture	1.0	%	ASTM D638
Bending modulus	3000	MPa	ASTM D790
bending strength	300	MPa	ASTM D790
compressive strength	241	MPa	ASTM D695

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	96	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	327	℃	ASTM D648
Glass transition temperature	163	℃	DSC
Melting temperature	360	℃	DSC
Linear coefficient of thermal expansion
MD	1.1E-5	1/℃	ASTM D696

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.